Murano FWD V6-3.5L (VQ35DE) (2006)
d.
Touch START on CONSULT-II.
e.
On CONSULT-II select TRANSMISSION > SELF-DIAG RESULTS.
f.
Press on the Brake (Brake switch ON).
g.
Press the accelerator pedal (0.5/8 - 4/8 throttle) not to exceed half, and hold it in the half or less open position. (This will set the closed
throttle position signal to OFF and the wide open throttle position signal to OFF.)
h.
On CONSULT-II touch ERASE, then touch YES.
I.
Wait 3 seconds and then release the accelerator pedal.
j.
Turn ignition switch OFF.
Step B: REPROGRAM THE TCM
Vehicle TCM Reprogramming Overview
^
There are four basic steps:
1.
Download (transfer) reprogramming data from ASIST into CONSULT-II.
2.
"Preparation" steps before reprogramming TCM.
3.
Reprogram the TCM.
4.
"Wrap-up" after reprogramming is finished.
Step One: Download (Transfer) Reprogramming Data From ASIST Into CONSULT-II
^
For those familiar with TCM Reprogramming, please review the following steps and use them as a Quick Reference for TCM reprogramming.
1.
Select vehicle model and model year (example: Murano, 2004).
2.
Select the correct reprogramming data:
a.
Locate the specific "Model Configuration" (Example: VQ35, CVT, 2WD).