Murano FWD V6-3.5L (VQ35DE) (2006)
Rear Door Window Glass: Removal and Replacement
GLASS AND REGULATOR
Removal and Installation
DOOR GLASS
Removal
1. Remove the rear door finisher.
2. Remove the rear door outside molding.
3. Remove the sealing screen.
4. Remove the rear lower sash.
5. Operate the power window switch to raise/lower the door window until the glass mounting bolts can be seen.
6. Remove the glass mounting bolts, and remove the glass from the inside of the panel.
Installation
Install in the reverse order of removal.
REGULATOR ASSEMBLY
Removal