Pathfinder 2WD V6-2960cc 3.0L SOHC MFI (VG30E) (1993)
4. Remove timing belt covers.
Note: It is not necessary to loosen or remove the timing belt during water pump service. Water pump cannot be disassembled and should be replaced
as a unit.
Fig. 21 Water Pump
4. Remove water pump attaching bolts, Fig. 21.
5. Remove water pump from engine. Do not spill coolant on timing belt.
6. Use a scraper to remove old liquid gasket from water pump.
-
Also remove old liquid gasket from mating surface of cylinder block.
INSTALLATION