nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Component Description|Page 2506 > < Component Description|Page 2504
Page 2
background image

Continuity should exist.

8. Also check harness for short to ground and short to power.
OK or NG
OK >> GO TO 5.
NG >> GO TO 4.
4.DETECT MALFUNCTIONING PART
Check the following.
-

Harness connectors E2, F32

-

IPDM E/R harness connector E119

-

15 A fuse (No.55)

-

Harness for open or short between harness connector F44 and fuse

-

Harness for open or short between harness connector F201 and fuel injector

>> Repair open circuit or short to ground or short to power in harness or connectors.
5.CHECK FUNCTION OF FUEL INJECTOR-II

Provide battery voltage between harness connector F201 as follows and then interrupt it. Listen to each fuel injector operating sound.

Operating sound should exist.

OK or NG
OK >> GO TO 6.
NG >> GO TO 7.
6.CHECK FUNCTION OF FUEL INJECTOR-III
1. Reconnect all harness connector disconnected.
2. Start engine.

Component Description|Page 2506 > < Component Description|Page 2504