Pathfinder 4WD V6-2960cc 3.0L SOHC MFI (VG30E) (1990)
Torsion Bar: Service and Repair
Fig. 2
REMOVAL
1.
Loosen the tension on the tension bars.
2.
Remove the dust boot and remove the snap ring.
FIGURE 4
3.
Remove the front torsion bar mounts (two 14 mm and one 19 mm nut per side) (Figure 4) and remove the torsion bars.
INSTALLATION
1.
Raise the lower control arm until the clearance between the compression bumper and the frame is:
CLEARANCE C
0 mm (0 in.)