Pathfinder 4WD V6-3.5L (VQ35) (2004)
to a control unit in one system may affect CONSULT-II access to other systems.
How to Check Terminals
How to Check Terminal
Connector and Terminal Pin Kit
Use the connector and terminal pin kit listed when replacing connectors or terminals.
The connector and terminal pin kit contains some of the most commonly used NISSAN connectors and terminals.
How to Probe Connectors
Connector damage and an intermittent connection can result from improperly probing of the connector during circuit checks. The probe of a digital
multimeter (DMM) may not correctly fit the connector cavity. To correctly probe the connector follow the procedures using a "T" pin. For the best
contact grasp the "T" pin using an alligator clip.
PROBING FROM HARNESS SIDE
Standard type (not waterproof type) connector should be probed from harness side with "T" pin.
-
If the connector has a rear cover such as a ECM connector; remove the rear cover before probing the terminal.
-
Do not probe waterproof connector from harness side. Damage to the seal between wire and connector may result.
PROBING FROM TERMINAL SIDE