Pathfinder 4WD V6-3.5L (VQ35) (2004)
^
Remove grease seal and bearing outer races with suitable brass bar.
INSPECTION
Thoroughly dean wheel bearings and wheel hub.
Wheel Bearing
^
Make sure wheel bearing rolls freely and is free from noise, crack, pitting and wear.
Wheel Hub
^
Check wheel hub for crack by using a magnetic exploration or dyeing test.
ASSEMBLY
1. Install bearing outer race with Tool until it seats in hub.
2. Pack multipurpose grease into wheel hub. - 4WD -
3. Apply multipurpose grease to each bearing cone.
4. Pack grease seal lip with multipurpose grease, then install it into wheel hub with suitable drift.