Pathfinder 4WD V6-3.5L (VQ35) (2004)
Electrical units
Electrical unit connector symbols are shown in the Connector Area of the wiring diagram.
However, when there is not enough space to show the connector terminal arrangement in the Connector Area of the wiring diagram, the electrical unit
connector number is shown in the Reference Area of the wiring diagram.
For electrical unit connector terminal arrangement, refer to the "ELECTRICAL UNITS" electrical reference. Most of the electrical unit connectors are
shown from the harness side of the connector.
Joint Connector
Joint Connector symbols are shown in the connector area of the wiring diagram. For connector internal wiring layout and joint connector terminal
arrangement, refer to the "JOINT CONNECTOR (J/C)".
How to Read Harness Layout
How to Read Harness Layout
The following Harness Layouts use a map style grid to help locate connectors on the drawings:
-
Main Harness
-
Engine Room Harness (Engine Compartment)
-
Engine Control Harness
TO USE THE GRID REFERENCE
1. Find the desired connector number on the connector list.
2. Find the grid reference.
3. On the drawing, find the crossing of the grid reference letter column and number row.
4. Find the connector number in the crossing zone.
5. Follow the line (if used) to the connector.
CONNECTOR SYMBOL
Harness Connector Descriptions
Description