Pathfinder 4WD V6-4.0L (VQ40) (2005)
/Page-720002.png)
Valve clearance
^
By referring to the figure, measure the valve clearances at locations marked "x" as shown (locations indicated in the figure) with feeler
gauge.
^
No. 1 cylinder at compression TDC
c. Rotate crankshaft by 240° clockwise (when viewed from engine front) to align No. 3 cylinder at TDC of its compression stroke.
NOTE: Crankshaft pulley bolt flange has a stamped line every 60°. They can be used as a guide to rotation angle.
^
By referring to the figure, measure the valve clearances at locations marked "x" as shown in the table (locations indicated in the figure)
with feeler gauge.