Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
Evaporator Temperature Sensor / Switch: Service and Repair
Automatic Air Conditioner
INTAKE SENSOR
Removal and Installation
REMOVAL
1. Remove the front kick plate.
2. Remove the lower dash side finisher.
3. Remove the front pillar lower finisher.
4. Remove the assist grip handle.
5. Remove the front pillar upper finisher.
6. Remove the lower glove box.
7. Remove the upper glove box (cluster lid E).
8. Disconnect the intake sensor electrical connector.
NOTE: The intake sensor is located on the top of the front heater and cooling unit assembly next to the A/C evaporator cover.
9. Twist the intake sensor to remove the intake sensor from the front heater and cooling unit assembly.
INSTALLATION
Installation is in the reverse order of removal.