Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
Canister Purge Solenoid: All Technical Service Bulletins
Emissions - MIL ON/DTC's P0442/P0448/P0455/P0456/P1446
Classification:
EC07-005a
Reference:
NTB07-060a
Date:
September 2, 2008
2005 - 2007 PATHFINDER; MIL "ON" WITH DTC P0442 / P0448 / P0455 / P0456 / P1446
This bulletin has been amended to add P0448. No other changes have been made.
APPLIED VEHICLES:
2005 - 2007
IF YOU CONFIRM:
A MIL "ON" with one or more of the following DTC(s) stored:
-
P0442 / P0448 / P0455 / P0456 / P1446
AND
-
EVAP Vent Control S/V is stuck open or will not seal when operated / closed.
ACTIONS:
1. Replace the EVAP Vent Control S/V.
2. Install the Filter Kit (refer to the Service Procedure in this bulletin).
3. Clear any DTCs stored in the ECM.
IMPORTANT:
The purpose of "ACTIONS" (above) is to give you a quick idea of the work you will be performing. You MUST closely follow the entire
Service Procedure as it contains information that is essential to successfully completing this repair.
PARTS INFORMATION
1. Bitumen Wax is available from the Nissan Direct Ship Chemical Care Product Program.
2. Use one of the following Zinc Rich primers or an equivalent:
-
3M (TM) Zinc Spray 16-501
For help finding a local source for 3M(TM) products or obtaining an MSDS, contact 3M(TM) Automotive After market Division.
-
CRC (R) Zinc-It (R) 18412
For help finding a local source for CRC(R) products or obtaining an MSDS, contact CRC (R) Customer Service Representative.
CLAIMS INFORMATION