Pathfinder 4WD V6-4.0L (VQ40DE) (2006)
Control Module: Adjustments
ATX14B
METHOD FOR POSITION ADJUSTMENT
1. Start engine. Run the engine for at least 10 seconds.
2. Stop vehicle and move A/T selector lever to N position with brake pedal depressed. Stay in N for at least 2 seconds.
3. Turn 4WD shift switch to 2WD position. Stay in 2WD for at least 2 seconds.
4. Turn ignition switch OFF.
5. Start engine.
6. Erase self-diagnosis. Refer to TF-34, CHECK BEFORE ENGINE IS STARTED. See: Testing and Inspection/Initial Inspection and Diagnostic
Overview/ATX14B/Initial Inspection/Basic Inspection/Check Before Engine Is Started
If 4WD shift indicator lamp does not indicate 2WD, install new transfer control unit and retry the above check.