Pathfinder Armada 4WD V8-5.6L (VK56) (2004)
Removal and Installation
REMOVAL
1. Remove engine assembly from vehicle.
2. Remove the following components and related parts:
^
Drive belt auto tensioner and idler pulley.
^
Thermostat housing and water hose.
^
Power steering pump bracket.
^
Water pipe (for oil cooler).
^
Oil pan (lower) (upper) and oil strainer.
^
Ignition coil.
3. Remove chain case cover (right bank) and (left bank).
a. Loosen and remove bolts in the reverse order of shown in the figure.
b. Using tool, cut liquid gasket and remove covers.
Tool number: KV101 11100 (J-37228)
CAUTION: Use care not to damage mating surfaces.
4. Obtain compression TDC of No. 1 cylinder as follows:
a. Turn crankshaft pulley clockwise to align the TDC identification notch (without paint mark) with timing indicator on front cover.