nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Timing Chain|Specifications|Page 3375 > < Timing Chain|Specifications|Page 3373
Page 5
background image

13. Using a suitable tool to assist, loosen bolts securing camshaft sprocket to remove camshaft sprocket.

CAUTION: To avoid interference between valves and pistons, do not turn crankshaft or camshaft when timing chain is disconnected.

14. Using the same procedure as for left bank, remove timing chain and associated parts on right side.

INSPECTION AFTER REMOVAL 

Check for cracks and any excessive wear at link plates. Replace chain if necessary.

INSTALLATION 

NOTE: The above figure shows the relationship between the mating mark on each timing chain and that of the corresponding sprocket, with the
components installed.

^

To install timing chain and associated parts, start with those on right bank. The procedure for installing parts on left bank is omitted because it is
the same as that for installation on right bank.

Timing Chain|Specifications|Page 3375 > < Timing Chain|Specifications|Page 3373