Pathfinder LE 2WD V6-3.3L (VG33E) (1999)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
To VIN # 350000
Actuator
REMOVAL
1. Disconnect battery cable.
2. Drain brake fluid. Refer to Hydraulic System / Brake Fluid / Service and Repair / Changing Brake Fluid.
3. Remove mounting bracket fixing bolts and nuts.
4. Disconnect connector, brake pipes and remove fixing nuts and actuator ground cable.
INSTALLATION
CAUTION: After installation, refill brake fluid. Then bleed air. Refer to Hydraulic System / Brake Fluid / Service and Repair / Bleeding Brake
System.
1. Tighten actuator ground cable. Place ground cable at a notch of mounting bracket.
2. Connect brake pipes temporarily.
3. Tighten fixing bolts and nuts.
4. Tighten brake pipes.
5. Connect connector and battery cable.
Hydraulic Assembly