Pathfinder LE 2WD V6-3.3L (VG33E) (1999)
-
Install the field coil.
Be sure to align the coil's pin with the hole in the compressor's front head.
-
Install the field coil harness clip using a screwdriver.
-
Install the pulley assembly using the installer and a hand press, and then install the snap ring using snap ring pliers.
-
Install the clutch disc on the drive shaft, together with the original shim(s). Press the clutch disc down by hand.
-
Using the holder to prevent clutch disc rotation, tighten the bolt to
14 N.m (1.4 kg-m, 10 ft-lb) torque.
After tightening the bolt, check that the pulley rotates smoothly.