Pathfinder SE 4WD V6-3.5L (VQ35) (2002)
3. Check that downstream of throttle valve is free from air leakage.
4. Adjust closed throttle position switch and reset memory. (Refer to Basic Inspection.) See: Powertrain Management/Computers and Control
Systems/Testing and Inspection/Initial Inspection and Diagnostic Overview/Initial Inspection (Basic Inspection)
5. When the above four items check out OK, engine component parts and their installation condition are questionable. Check and eliminate the cause
of the problem. It is useful to perform "TROUBLE DIAGNOSIS - SPECIFICATION VALVE".
6. If any of the following conditions occur after the engine has started, eliminate the cause of the problem and perform "Idle air volume learning" all
over again:
-
Engine stalls.
-
Erroneous idle.
-
Blown fuses related to the IACV-AAC valve system.