nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Power Steering Line/Hose > < Power Steering Fluid|Capacity Specifications|Page 10927
Page 2
background image

maximum. This will raise oil temperature abnormally.

3. Check pressure with steering wheel fully turned to left and right positions with engine idling at 1,000 RPM. Oil pump maximum standard pressure

is 8,630 - 9,219 kPa (1,251 - 1,337 psi)

CAUTION:  Do not hold the steering wheel in a locked position for more than 15 seconds.

4. If oil pressure is below the standard pressure, slowly close shut-off valve and check pressure.

^

When pressure reaches standard pressure, gear is damaged.

^

When pressure remains below standard pressure, pump is damaged.

CAUTION:  Do not close shut-off valve for more than 15 seconds.

5. If oil pressure is higher than standard pressure, check oil pump flow control valve.
6. After checking hydraulic system, remove oil pressure gauge tool and add fluid as necessary. Then completely bleed air out of system.

Power Steering Line/Hose > < Power Steering Fluid|Capacity Specifications|Page 10927