Nissan Pathfinder XE 2WD V6-33L (VG33E) Transmission: Low and Reverse Brake Component Specs
-
If not within wear limit, replace.
Low One-Way Clutch Inner Race
-
Check frictional surface of inner race for wear or damage.
-
Install a new seal rings onto low one-way clutch inner race.
-
Be careful not to expand seal ring gap excessively.
-
Measure seal ring-to-groove clearance. If not within allowable limit, replace the low one-way clutch inner race.
Inspection standard:
Standard value: 0.10 - 0.25 mm (0.0039 - 0.0098 inch)
Allowable limit: 0.25 mm (0.0098 inch)
ASSEMBLY
1. Install needle bearing onto one-way clutch inner race.
-
Pay attention to its direction. Black surface goes to rear side.
-
Apply petroleum jelly to needle bearing.
2. Install oil seal and D-ring onto piston.
-
Apply ATF to oil seal and D-ring.