nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Multi-Function Thermal Sensor / Switch|Testing and Inspection|Page 920 > < Cooling System|Capacity Specifications|Page 915
Page 1
background image

Multi-Function Thermal Sensor / Switch: Testing and Inspection

1.

Remove thermo switch.

2.

Dip temperature sensor of switch in cold water.

3.

Slowly raise water temperature, ensuring that switch shows continuity below 31-35 degrees F and does not show continuity above 38-42 degrees F.

Multi-Function Thermal Sensor / Switch|Testing and Inspection|Page 920 > < Cooling System|Capacity Specifications|Page 915