PL720 2WD L4-2488cc 2.5L DSL (SD25) (1985)
4.
Using a deep socket, hand tighten the nuts until they are snug.
5.
Install two alloy wheel nuts on the studs at the 3 (4) O'clock and 9 (3) O'clock positions and hand tighten both before using a torque wrench.
CAUTION:
Do not use an impact wrench.
6.
Remove the two previously installed steel wheel lug nuts and replace them with two alloy wheel nuts. Using a torque wrench, torque all four lug
nuts to 70 ft-lbs.
WARRANTY INFORMATION
CS
PNC
CT
OP CODE
DESCRIPTION
FLAT RATE
2R
40310
34
WN10HA
Balance 2 wheels
0.7/hr.
WN10ZA
Balance each
0.3/hr.
additional wheel