PL720 2WD L4-2488cc 2.5L DSL (SD25) (1985)
Shift Linkage: Adjustments
Fig. 1 Manual linkage adjustment. 1982-86 Exc. 200SX, 300ZX & 1986-1/2 Pickup
1984-86 EXC. 200SX, 300ZX & 1986-1/2 PICKUP
1.
Place shift lever in Drive position, Fig. 1.
2.
Loosen locknuts and move shift lever until Drive is properly aligned and car is in Drive range.
3.
Tighten locknut.
4.
If correct adjustment cannot be obtained, replace grommets as necessary.
5.
Check for proper operation.