PL720 4WD L4-2389cc 2.4L SOHC (Z24) (1983)
INSPECTION ITEM (A)
Specifications of speedometer indicator (with vehicle in operation)
(1)
Allowable vibration range:
Plus-minus 3 km/h (2 MPH) [Above 35 km/h (22 MPH)]
INSPECTION AND CORRECTION PROCEDURES
Parts to be Inspected
Inspection Criteria
Correction
and Inspection Item
Procedures
(1)
Improper connection with pinion Reconnect cable gear/speedometer.
(2)
Evidence of wear at end of inner See note a cable.
(3)
Sharp edges at end of inner cable See note b which is connected to speedometer.
Speedometer Cable (B)
(4)
Lack of lubricant on inner cable. Add lubricant
(5)
Sharp cable bend, improper cable See note c routing or tie wraps too tight around cable.
(6)
Rust formation, breakage, wear or Replace cable damage of inner cable.
Pinion Gear (C)
(1)
Worn or cracked gear tooth.
Replace
Speedometer (D)
(1)
Foreign particles (i.e., metal chips,
See note d
grease or oil) at or around magnet.