PL720 4WD L4-2389cc 2.4L SOHC (Z24) (1983)
3. Apply an approved tire lubricant to the tire and wheel in the areas shown in Figures 1 and 2.
^ Tire lubricant is a locally sourced common product used in the tire service process
Tire:
^ Apply lube to the inner bead only of both beads
^ Do not apply lube to the flange area (outer bead area)
NOTE:
Too much tire lubricant may allow the tire to slip on the rim while driving. If this occurs the tire may become un-balanced.
Wheel:
^ Apply lube to the Safety Humps and Bead Seating area.
^ Do not apply lube to the flange area
4. Before inflating the tire:
^ If there are "match-mount" marks on the tire and rim, align the marks.