PL720 4WD L4-2389cc 2.4L SOHC (Z24) (1983)
c.
Measure distance 'A' between the reference surface and the lower link spindle center. (See Figure 2 or 3 for application). Note the
measurement.
d.
Measure distance 'B' between the reference surface and the tension rod attaching bolt (Figure 2) or the steering stopper bracket (Figure 3).
Note the measurement.
e.
Subtract 'B' measurement from 'A' measurement to obtain H-dimension (A - B = H).
f.
Ensure that H-dimension measurement is within the H-dimension specifications below.
H-dimension Specifications mm (in.)
MODEL YEAR
2WD
4WD
1980 - 1983
124-129 (4.88-5.08)
134-139 (5.28-5.47)
1983.5 - 1984
Regular Cab
118-122 (4.65-4.80)
44-48 (1.73-1.89)
King Cab
113-117 (4.45-4.61)
39-43 (1.54-1.69)
g.
If necessary, turn the adjusting anchor arm bolt to obtain proper H-dimension (See Figure 4).
CAUTION:
Do not use an impact wrench on the adjusting anchor arm bolt.
h.
Repeat Steps C through H for the opposite front wheel.