Pulsar L4-1809cc 1.8L DOHC (CA18DE) (1988)
Axle Shaft: Service and Repair
Axle Shaft, Conventional Fixed/Floating
Fig. 1 Rear Suspension (Part 2 Of 2). 2WD Models
Refer to Fig. 9 for replacement, noting the following:
1.
When raising and supporting vehicle, do not jack up at parallel links.
2.
Disconnect brake hydraulic line and parking brake cable at equalizer.
Fig. 10 Removing exhaust pipe & radius rod. 1987-88 Pulsar & 2WD Sentra
3.
Remove exhaust pipe attaching bolts, Fig. 10, then radius rod attaching bolts and pull out radius rod, pushing exhaust pipe downward.
4.
Remove shock absorber upper attaching bolts.