Quest V6-3.5L (VQ35DE) (2009)
Rear Vision Camera: Service and Repair
REAR VIEW MONITOR
Rear View Camera
REMOVAL AND INSTALLATION
Removal
1. Remove license lamp finisher. Refer to See: Body and Frame/Exterior Moulding / Trim/Service and Repair.
2. Disconnect rear view camera connector (1).
3. Remove rear view camera screw and remove rear view camera.
Installation
Installation is in the reverse order of removal.
NOTE:
After installing rear view camera, perform side distance guideline correction procedure. Refer to See: Testing and Inspection/Programming and
Relearning.