nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Trailer Lighting Module > < Electrical - Trailer Light Wiring Info.|Page 4288
Page 3
background image

^ When splicing into the vehicle electrical system, a power-type module/converter must be used to provide power for all trailer lighting. A power-type

module/converter uses the vehicle battery as a direct power source for all trailer lights while using the vehicle taillight, stoplight, and turn signal
circuits only as a signal source. (See the illustration above.) The module/converter must draw no more than 5 milliamps from the vehicle turn signal
circuits and no more than 15 milliamps from the stop and tail light circuits.

CAUTION:

Using a module/converter that exceeds these power requirements listed above may negatively affect the performance and function of the vehicle's
electrical system.

See a professional trailer dealer or trailer rental agency for installation of the proper equipment.

Customers who inquire about towing should be reminded of the following:

^ Always check for correct operation of the turn signals, stoplights, and taillights every time a trailer is hitched up for towing.

^ The towing capacity for 350Z (Coupe Only), Altima, Maxima, and Sentra is 1,000 lbs.

For more information, refer customers to the Owner's Manual as well as the Nissan Towing Guide, available online at NissanUSA.com.

Trailer Lighting Module > < Electrical - Trailer Light Wiring Info.|Page 4288