Quest V6-3.5L (VQ35DE) (2009)
Glove Compartment: Service and Repair
INSTRUMENT PANEL ASSEMBLY
Glove Box
REMOVAL
CAUTION:
To prevent damage, place shop cloths onto surrounding parts.
1. Place the door weatherstrip by the glove box aside.
2. Remove glove box screws using power tool.
3. Carefully remove the clips by prying loose.
4. Disconnect glove box lamp harness.
CAUTION:
To prevent damage, do not let the glove box hang from glove box lamp harness.
INSTALLATION
Installation is in the reverse order of removal.