Quest V6-3.5L (VQ35DE) (2009)
Brake Pedal Assy: Adjustments
BRAKE PEDAL
Inspection and Adjustment
INSPECTION
1. If equipped with adjustable pedals, move the brake pedal to the forward most position (closest to the floor).
2. Inspect the brake pedal height, play, and switch clearance from the dash lower panel as shown.
CAUTION:
When equipped with adjustable pedals, the brake pedal must be set in the forward most position (closest to the floor) for checking the brake
pedal specifications.
Tool number : - (J-46532)
3. Adjust the brake pedal as necessary.
ADJUSTMENT
1. Loosen the stop lamp switch and ASCD cancel switch by turning 45° counterclockwise.
2. Loosen the lock nut on the input rod.