Workshop Repair Manuals

Nissan and Datsun Workshop Manuals

[PREV PAGE] [NEXT PAGE]

nissan Workshop Repair Guides


Quest V6-3.5L (VQ35DE) (2009)

Brakes and Traction Control > Sensors and Switches - Brakes and Traction Control > Yaw Rate Sensor > Component Information > Locations > Page 3046

Page 1
background image

Yaw Rate Sensor: Service and Repair

G SENSOR

Removal and Installation

REMOVAL
1. Remove center console lower cover. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and

Repair/Instrument Panel.

2. Remove yaw rate/side/decel G sensor nuts.

CAUTION:
-

Do not use power tools to remove the yaw rate/side/decel G sensor.

-

Do not drop or strike the yaw rate/side/decel G sensor.

3. Disconnect harness connector and remove the yaw rate/side/decel G sensor.

INSTALLATION
Installation is in the reverse order of removal.
-

Tighten yaw rate/side/decel G sensor nuts to specification.

CAUTION:
-

Do not use power tools to install the yaw rate/side/decel G sensor.

-

Do not drop or strike the yaw rate/side/decel G sensor.

Brakes and Traction Control > Sensors and Switches - Brakes and Traction Control > Yaw Rate Sensor > Component Information > Locations > Page 3046

[PREV PAGE] [NEXT PAGE]