Quest V6-3.5L (VQ35DE) (2009)
a. Install the crankshaft sprocket.
- Make sure the mating marks on the crankshaft sprocket face front of engine.
4. Install the timing chain (primary).
- Water pump (G).
- Install timing chain (primary) so the mating mark (punched) (B) on camshaft sprocket (C) is aligned with the copper link (A) on the timing
chain, while the mating mark (notched) (E) on the crankshaft sprocket (D) is aligned with the yellow one (F) on the timing chain, as shown.
- When it is difficult to align mating marks of the timing chain (primary) with each sprocket, gradually turn the camshaft to align it with the
mating marks.
- During alignment, be careful to prevent dislocation of mating mark alignments of the secondary timing chains.