Quest V6-3.5L (VQ35DE) (2009)
ATC
BLOWER MOTOR
Removal and Installation
FRONT BLOWER MOTOR
Removal
1. Remove the instrument panel assembly. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel.
2. Remove the center ventilator duct. Refer to See: Air Duct/Service and Repair/Automatic/Removal And Installation.
3. Remove the front blower motor.
Installation
Installation is in the reverse order of removal.
REAR BLOWER MOTOR
Removal
1. Remove the rear heater and cooling unit assembly. Refer to See: Housing Assembly HVAC/Service and Repair/Removal And Installation.
2. Remove the three screws and remove the blower motor.
Installation
Installation is in the reverse order of removal.
MTC
BLOWER MOTOR
Removal and Installation
FRONT BLOWER MOTOR
Removal
1. Remove the instrument panel assembly. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel.
2. Remove the center ventilator duct. Refer to See: Air Duct/Service and Repair/Manual/Removal And Installation.
3. Remove the front blower motor.
Installation
Installation is in the reverse order of removal.
REAR BLOWER MOTOR