Quest V6-3.5L (VQ35DE) (2009)
Maintenance Required Lamp/Indicator: Service and Repair
Maintenance Information
CONTROL PANEL BUTTONS (With and Without Navigation System)
COLOR SCREEN WITHOUT NAVIGATION SYSTEM (if so equipped)
If you use the system with the engine not running (ignition ON or ACC) for a long time, it will use up all the battery power, and the engine will not start.
Reference symbols:
ENTER button - This is a button on the control panel. By pressing this button you can select the item or perform this action.
"Display" key - This is a select key on the screen. By selecting this key you can proceed to the next function.
HOW TO USE THE JOYSTICK AND ENTER BUTTON
Use the joystick to choose an item on the display screen. Move the joystick up, down, left or right to highlight an item. Then press the ENTER button to
select the item or perform the action.
HOW TO USE THE BACK BUTTON
This button has two functions.
-
Go back to the previous display (cancel). If you press the BACK button during setup, the setup will be canceled and/or the display will return to
the previous screen.
-
Finish setup.
In some screens pressing the BACK button accepts the changes made during setup.
HOW TO USE THE TRIP BUTTON