Quest V6-3.5L (VQ35DE) (2009)
Brake Light Bulb: Service and Repair
STOP LAMP
Bulb Replacement
HIGH-MOUNTED STOP LAMP
Removal
1. Remove the rear washer nozzle. Refer to See: Wiper and Washer Systems/Windshield Washer Spray Nozzle/Service and Repair/Rear Wiper And
Washer System/Rear Washer Nozzle.
2. Disconnect the electrical connector.
3. Remove the nuts and remove the high-mounted stop lamp.
4. Turn the bulb socket counterclockwise to remove it from the high-mounted stop lamp housing.
5. Pull the bulb from the socket.
Installation
Installation is in the reverse order of removal.
STOP LAMP
Refer to See: Tail Lamp/Tail Light Bulb/Service and Repair.