Quest V6-3.5L (VQ35DE) (2009)
![background image](/nissan/quest/v6-3.5l_(vq35de)/Page-490024.png)
2. CAN DIAG SUPPORT MNTR (with PAST): Check the CAN DIAG SUPPORT MNTR (with PAST) of units indicating "U1000" or "U1001" on
SELF-DIAG RESULTS. Draw a line on the diagnosis sheet to indicate the possible error circuit.
NOTE:
For the details of each indication on CAN DIAG SUPPORT MNTR, refer to See: Trouble Diagnosis/CAN Diagnostic Support Monitor.
a. Reception item of "ECM": "VDC/TCS/ABS", "3" is indicated in the "PAST". This means ECM could not receive the signal from ABS in the
past. Draw a line between ECM and ABS (line 2-a in the figure below).
b. Reception item of "M&A": "VDC/TCS/ABS", "3" is indicated in the "PAST". This means M&A could not receive the signal from ABS in the
past. Draw a line between M&A and ABS (line 2-b in the figure below).
c. Reception item of "TCM": "VDC/TCS/ABS", "3" is indicated in the "PAST". This means TCM could not receive the signal from ABS in the
past. Draw a line between TCM and ABS (line 2-c in the figure below).