Quest V6-3.5L (VQ35DE) (2009)
Fuel Rail: Service and Repair
FUEL INJECTOR AND FUEL TUBE
Removal and Installation
CAUTION:
-
Apply new engine oil when installing the parts as specified to do so.
-
Do not remove or disassemble parts unless instructed as shown.
REMOVAL
1. Release the fuel pressure. Refer to See: Fuel Pressure/Testing and Inspection.
2. Remove the intake manifold collector (upper and lower). Refer to See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and
Repair/Intake Manifold Collector.
3. Disconnect the fuel quick connector on the engine side.
-
Using Tool perform the following steps to disconnect the quick connector.
Tool number : - (J-45488)