Quest V6-3.5L (VQ35DE) (2009)
Seat Belt: Service and Repair
Front Seat Belt
SEAT BELTS
Front Seat Belt
COMPONENTS
REMOVAL AND INSTALLATION OF SEAT BELT RETRACTOR
Removal
CAUTION:
-
Before servicing SRS, turn the ignition switch off, disconnect both battery terminals and wait at least three minutes.
1. Disconnect the negative and positive battery terminals, then wait at least three minutes.
2. Remove the center pillar upper/lower trim. Refer to See: Body and Frame/Interior Moulding / Trim/Trim Panel/Service and Repair.
3. Separate the seat belt guide from the center pillar.
4. Remove the seat belt retractor anchor bolts and assembly.