Quest V6-3.5L (VQ35DE) (2009)
Yaw Rate Sensor: Service and Repair
G SENSOR
Removal and Installation
REMOVAL
1. Remove center console lower cover. Refer to See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and
Repair/Instrument Panel.
2. Remove yaw rate/side/decel G sensor nuts.
CAUTION:
-
Do not use power tools to remove the yaw rate/side/decel G sensor.
-
Do not drop or strike the yaw rate/side/decel G sensor.
3. Disconnect harness connector and remove the yaw rate/side/decel G sensor.
INSTALLATION
Installation is in the reverse order of removal.
-
Tighten yaw rate/side/decel G sensor nuts to specification.
CAUTION:
-
Do not use power tools to install the yaw rate/side/decel G sensor.
-
Do not drop or strike the yaw rate/side/decel G sensor.