Quest V6-3.5L (VQ35DE) (2009)
Control Arm: Testing and Inspection
Suspension Arm
SUSPENSION ARM
Inspection
-
Check suspension arm for damage, cracks, deformation and replace if necessary.
-
Check rubber bushing for damage, cracks and deformation.
Replace suspension arm assembly if necessary.
-
Check ball joint. Replace suspension arm assembly if any of the following exists:
-
Ball stud is worn.
-
Joint is hard to swing.
-
Play in axial direction is excessive.
-
Before checking, turn ball joint at least 10 revolutions so that ball joint is properly broken in.