nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Heated Glass Element|Testing and Inspection > < System Description
Page 2
background image

-

through 50A fusible link (letter j, located in the fuse and fusible link box)

-

to BCM terminal 70.

With the ignition switch turned to ON or START position, power is supplied
-

through 10A fuse [No.12, located in the fuse block (J/B)]

-

to rear window defogger relay terminal 1

-

through 10A fuse [No.16, located in the fuse block (J/B)]

-

to BCM terminal 38

-

through 10A fuse [No. 2, located in the fuse block (J/B)]

-

to front air control terminal 15.

Ground is supplied
-

to BCM terminal 67

-

to front air control terminal 36

-

through body grounds M57, M61 and M79

-

to IPDM E/R terminals 38 and 60

-

through body grounds E9, E15 and E24.

When front air control (rear window defogger switch) is turned to ON, ground is supplied
-

to BCM terminal 9

-

through front air control terminal 16

-

through front air control terminal 36

-

through body grounds M57, M61 and M79.

Then rear window defogger switch is illuminated.
Then BCM recognizes that rear window defogger switch is turned to ON.
Then it sends rear window defogger switch signals to IPDM E/R and display control unit (with color display) via CAN communication (CAN-H,
CAN-L).
When IPDM E/R receives rear window defogger switch signals, ground is supplied
-

to rear window defogger relay terminal 2

-

through IPDM E/R terminal 52

-

through IPDM E/R terminal 60

-

through body grounds E9, E15 and E24.

Then rear window defogger relay is energized.
With power and ground supplied, rear window defogger filaments heat and defog the rear window.
When rear window defogger relay is turned to ON (with door mirror defogger), power is supplied
-

through rear window defogger relay terminal 5

-

through fuse block (J/B) terminal 2Q

-

through 10A fuse [No. 8, located in the fuse block (J/B)]

-

through fuse block (J/B) terminal 5N

-

to door mirror defogger (LH and RH) terminal 6.

Door mirror defogger (LH and RH) terminal 5 is grounded through body grounds M57, M61 and M79.
With power and ground supplied, door mirror defogger filaments heat and defog the mirror.

Heated Glass Element|Testing and Inspection > < System Description