Quest Minivan GXE V6-3.3L (VG33E) (2002)
4. While moving the connector check whether the male terminal can be easily inserted or not.
If the male terminal can be easily inserted into the female terminal replace the female terminal.
Waterproof Connector Inspection
Waterproof Connector Inspection
If water enters the connector it can short interior circuits. This may lead to intermittent problems.
Check the following items to maintain the original waterproof characteristics.
RUBBER SEAL INSPECTION
Most waterproof connectors are provided with a rubber seal between the male and female connectors. If the seal is missing the waterproof performance
may not meet specifications.
The rubber seal may come off when connectors are disconnected. Whenever connectors are reconnected make sure the rubber seal is properly installed
on either side of male or female connector.
WIRE SEAL INSPECTION
The wire seal must be installed on the wire insertion area of a waterproof connector. Be sure that the seal is installed properly.
Terminal Lock Inspection