nissan Workshop Repair Guides

Nissan Datsun Quest Minivan SE V6-33L (VG33E) Workshop Service Manuals

Engine Controls - Idle, Base Idle & Timing, Startability|Page 2612 > < Engine Controls - Idle, Base Idle & Timing, Startability|Page 2610
Page 4
background image

8.

If the vehicle is not CONSULT compatible, monitor the idle speed using the tachometer connected in step 1. If using CONSULT, perform the
following procedure:

Monitor the idle speed (CMPS^RPM) on the CONSULT screen.

9.

Check the idle rpm and adjust to specification (if necessary) using the screw on the IACV-AAC valve.

The table shows ignition timing and base idle speed for some models.

If the model or model year you are working on is not listed, refer to the appropriate service manual (EF &) EC section, and perform the "IDLE
SPEED/IGNITION TIMING/IDLE MIXTURE RATIO INSPECTION" procedure.

10.

Turn the engine off, and re-connect the TPS.

Engine Controls - Idle, Base Idle & Timing, Startability|Page 2612 > < Engine Controls - Idle, Base Idle & Timing, Startability|Page 2610