Quest Minivan SE V6-3.3L (VG33E) (1999)
Air Door Actuator / Motor: Adjustments
INTAKE DOOR MOTOR CONTROL LINKAGE ADJUSTMENT (Manual Climate Control)
1. Connect the intake door motor harness connector before installing the intake door motor.
2. Turn ignition switch ON.
3. Select MAX A/C (REC) mode.
4. Install the intake door lever and the intake door motor.
5. Set the intake door rod in MAX A/C (REC) position and fasten door rod to holder.
6. Check that the intake door operates properly when MAX A/C (REC) mode is selected.