Quest Minivan SE V6-3.3L (VG33E) (1999)
G.
While looking into the hose end of the valve, touch "OFF" and confirm the air passage re-opens fully and immediately (the valve should not
stick closed).
H.
Repeat steps F and G above to confirm the valve closes and re-opens consistently.
2.
Confirm the sealing O-ring (for the valve) is:
^
Correctly positioned and is not damaged (see Figure 1)
^
Adequately lubricated with Texaco Canopus 13 mineral oil (P/N 999MP-AJ000)
3.
Make sure the water separator and related hoses are not blocked by debris or insects.
NOTE:
If a Maxima, Truck or 240SX is not equipped with a water separator, refer to the TSB(s) in the table above to install one.
CLAIMS INFORMATION
If applicable, submit a Primary Failed Part (PP) line claim using the claims coding:
For 1996-97 vehicles:
For 1998-later vehicles: