Quest Minivan XE V6-2960cc 3.0L SOHC MFI (VG30E) (1998)
Seals and Gaskets: Service and Repair
CAMSHAFT OIL SEAL
1. Remove timing belt.
2. Remove camshaft sprocket.
3. Remove camshaft oil seal.
-
Be careful not to scratch camshaft.
4. Apply engine oil to new camshaft oil seal and install using suitable tool.
FRONT OIL SEAL
1. Remove timing belt.
2. Remove camshaft sprocket.
3. Remove camshaft oil seal.
-
Be careful not to scratch camshaft.
4. Apply engine oil to new camshaft oil seal and install using suitable tool.
REAR OIL SEAL
1. Remove drive plate.
2. Remove rear oil seal retainer.
3. Remove rear oil seal from retainer.
-
Be careful not to scratch rear oil seal retainer.
4. Apply engine oil to new oil seal and install using suitable tool. Install rear oil seal retainer.
-
Always use a new oil seal retainer to cylinder block gasket.
VALVE OIL SEAL