nissan Workshop Repair Guides

Nissan and Datsun Workshop Service and Repair Manuals

Diagram Information and Instructions|Page 5638 > < Diagram Information and Instructions|Page 5636
Page 1
background image

Canister Purge Volume Control Valve: Testing and Inspection

EVAP canister vent control valve 

Check air passage continuity.

With Consult 

Perform "VENT CONTROL/V" in "ACTIVE TEST" mode.

OR

Without Consult 

If NG, clean valve using air blower or replace as necessary. 
If portion (B) is rusted, replace EVAP canister vent control valve.
Make sure new O-ring is installed properly.

Water separator 

1. Check visually for insect nests in the water separator air inlet.
2. Check visually for cracks or flaws in the appearance.
3. Check visually for cracks or flaws in the hose.

Diagram Information and Instructions|Page 5638 > < Diagram Information and Instructions|Page 5636