Quest Minivan XE V6-2960cc 3.0L SOHC MFI (VG30E) (1998)
Standard type (not waterproof type) connector should be probed from harness side with "T" pin.
NOTE:
^
If the connector has a rear cover such as a ECM connector, remove the rear cover before probing the terminal.
^
Do not probe waterproof connector from harness side. Damage to the seal between wire and connector may result.
Female Terminal
There is a small notch above each female terminal. Probe each terminal with the "T" pin through the notch.
NOTE: Do not insert any object other than the same type male terminal into female terminal.
^
Some connectors do not have a notch above each terminal. To probe each terminal, remove the connector retainer to make contact space for
probing.
Male Terminal
Carefully probe the contact surface of each terminal using a "T" pin.
NOTE: Do not bend terminal.
Terminal Lock Inspection