Quest Minivan XE V6-2960cc 3.0L SOHC MFI (VG30E) (1998)
components and harness connectors.
4. Refer to the Circuit Diagram for Quick Pinpoint Check.
If you must check circuit continuity between harness connectors in more detail, such as when a sub-harness is used, refer to Wiring Diagram and
Harness Layout for identification of harness connectors.
5. When checking circuit continuity, ignition switch should be "OFF".
6. Before checking voltage at connectors, check battery voltage.
7. After accomplishing the Diagnostic Procedures and Electrical Components Inspection, make sure that all harness connectors are reconnected
properly.
Key to Symbol Signifying Measurements or Procedures