Rogue 2WD L4-2.5L (QR25DE) (2008)
8. Insert remover tool (A) between door finisher and door panel to disengage door finisher mounting clips, starting from the bottom and working to
the top.
9. Pull up rear door finisher and pull out.
10. Disconnect lock knob cable (1) and inside handle cable (2) from rear door inside handle (3).
11. Remove rear door finisher.
12. Remove the following parts after removing rear door finisher.
-
Rear door inside handle.
-
Pull handle bracket
INSTALLATION
Install in the reverse order of removal.
CAUTION: When installing door finisher, check that clips are securely fitted in panel holes on body, and then press them in.